Turcon® Double Delta® - PDD000100-M12V
Turcon® Double Delta® is a rubber energised plastic faced seal. The seal is designed to expand and improve the service parameters of O-Rings and is installed in existing O-Ring grooves.
Quality & Norms:
Correspond to recommendation of ISO 3320 yes
O-Ring:
O-Ring Dimensions 6.70 x 1.80 mm
O-Ring TSS Part No. ORAR00010
Material Properties:
Material Type PTFE/FKM
Installation Dimensions:
Bore Diameter, DN H9 10 mm
Groove Diameter, d1 h9 7.1 mm
Groove Width, L1 +0.2 2.4 mm
Seal Capabilities:
Min. Temperature -10 °C
Max. Temperature 200 °C
Speed max. 15 m/s
Pressure max. 35 MPa
Material Information for the product(s) on this page
M12
Colour:
Dark Grey
Basic Material:
PTFE
Filler:
Virgin PTFE compounded with Turcon®, mineral fibre and additives
Commercial Description:
Turcon® M12 is a modern compound and the new standard industrial material. A development of thorough benchmarking and performance testing, Turcon® M12 offers low friction, high wear resistance and costs on par with standard bronze-filled compounds. This material is designed to be the first choice for seals used with linear motion, replacing standard (medium-filled) industrial bronze-filled compounds. Used in article numbers ending in M12N and M12V.
V7
Colour:
Green
Basic Material:
FKM
Commercial Description:
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V