V-Ring type S
Profile S is wide and tapered, which provides a very firm hold on the shaft. The rings are available for shaft diameters from 5 to 199 mm. The Trelleborg V-ring® is an all-rubber seal for rotary shafts, rotating with the shaft and sealing axially against the stationary counterface. Its light lip pressure generates low friction. It can also be used as a secondary seal to protect primary seals that do not perform well in hostile environments.
Size Range:
8 mm to 199 mm
Temperature:
-40 °C to 200 °C
Speed (max):
12 m/s
Material Information for the product(s) on this page
N6T50
Colour:
Black
Basic Material:
NBR
Hardness:
60 (Shore A)
Commercial Description:
The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C (for a short period of time up to +120 °C). NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.
VDT50
Colour:
Black
Basic Material:
FKM
Hardness:
65 (Shore A)
Commercial Description:
FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and aging. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures.
| Product No. | Material Type | For shaft diameter, d1 | Minimum, d3 | Fitted width, B1 | Add to Enquiry | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Product No.TWVS00200-VDT50 | Material Type [FKM] | For shaft diameter, d<sub>1</sub> 19 - 21 | Minimum, d<sub>3</sub> d1 + 12 | Fitted width, B<sub>1</sub> 9.0 ±0.8 | ||||||
| Product No.TWVS00300-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 29 - 31 | Minimum, d<sub>3</sub> d1 + 12 | Fitted width, B<sub>1</sub> 9.0 ±0.8 | ||||||
| Product No.TWVS00450-VDT50 | Material Type [FKM] | For shaft diameter, d<sub>1</sub> 43 - 48 | Minimum, d<sub>3</sub> d1 + 15 | Fitted width, B<sub>1</sub> 11.0 ±1.0 | ||||||
| Product No.TWVS00600-VDT50 | Material Type [FKM] | For shaft diameter, d<sub>1</sub> 58 - 63 | Minimum, d<sub>3</sub> d1 + 15 | Fitted width, B<sub>1</sub> 11.0 ±1.0 | ||||||
| Product No.TWVS00650-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 63 - 68 | Minimum, d<sub>3</sub> d1 + 15 | Fitted width, B<sub>1</sub> 11.0 ±1.0 | ||||||
| Product No.TWVS00700-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 68 - 73 | Minimum, d<sub>3</sub> d1 + 18 | Fitted width, B<sub>1</sub> 13.5 ±1.2 | ||||||
| Product No.TWVS00750-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 73 - 78 | Minimum, d<sub>3</sub> d1 + 18 | Fitted width, B<sub>1</sub> 13.5 ±1.2 | ||||||
| Product No.TWVS00800-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 78 - 83 | Minimum, d<sub>3</sub> d1 + 18 | Fitted width, B<sub>1</sub> 13.5 ±1.2 | ||||||
| Product No.TWVS00950-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 93 - 98 | Minimum, d<sub>3</sub> d1 + 18 | Fitted width, B<sub>1</sub> 13.5 ±1.2 | ||||||
| Product No.TWVS00950-VDT50 | Material Type [FKM] | For shaft diameter, d<sub>1</sub> 93 - 98 | Minimum, d<sub>3</sub> d1 + 18 | Fitted width, B<sub>1</sub> 13.5 ±1.2 | ||||||
| Product No.TWVS01200-VDT50 | Material Type [FKM] | For shaft diameter, d<sub>1</sub> 115 - 125 | Minimum, d<sub>3</sub> d1 + 21 | Fitted width, B<sub>1</sub> 15.5 ±1.5 | ||||||
| Product No.TWVS01300-VDT50 | Material Type [FKM] | For shaft diameter, d<sub>1</sub> 125 - 135 | Minimum, d<sub>3</sub> d1 + 21 | Fitted width, B<sub>1</sub> 15.5 ±1.5 | ||||||
| Product No.TWVS01400-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 135 - 145 | Minimum, d<sub>3</sub> d1 + 21 | Fitted width, B<sub>1</sub> 15.5 ±1.5 | ||||||
| Product No.TWVS01400-VDT50 | Material Type [FKM] | For shaft diameter, d<sub>1</sub> 135 - 145 | Minimum, d<sub>3</sub> d1 + 21 | Fitted width, B<sub>1</sub> 15.5 ±1.5 | ||||||
| Product No.TWVS01500-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 145 - 155 | Minimum, d<sub>3</sub> d1 + 21 | Fitted width, B<sub>1</sub> 15.5 ±1.5 | ||||||
| Product No.TWVS01500-VDT50 | Material Type [FKM] | For shaft diameter, d<sub>1</sub> 145 - 155 | Minimum, d<sub>3</sub> d1 + 21 | Fitted width, B<sub>1</sub> 15.5 ±1.5 | ||||||
| Product No.TWVS01600-VDT50 | Material Type [FKM] | For shaft diameter, d<sub>1</sub> 155 - 165 | Minimum, d<sub>3</sub> d1 + 24 | Fitted width, B<sub>1</sub> 18.0 ±1.8 | ||||||
| Product No.TWVS01990-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 195 - 210 | Minimum, d<sub>3</sub> d1 + 24 | Fitted width, B<sub>1</sub> 18.0 ±1.8 | ||||||
| Product No.TWVS01990-VDT50 | Material Type [FKM] | For shaft diameter, d<sub>1</sub> 195 - 210 | Minimum, d<sub>3</sub> d1 + 24 | Fitted width, B<sub>1</sub> 18.0 ±1.8 | ||||||
| Product No.TWVS00070-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 6.5 - 8.0 | Minimum, d<sub>3</sub> d1 + 6 | Fitted width, B<sub>1</sub> 4.5 ±0.4 | ||||||
| Product No.TWVS00080-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 8.0 - 9.5 | Minimum, d<sub>3</sub> d1 + 6 | Fitted width, B<sub>1</sub> 4.5 ±0.4 | ||||||
| Product No.TWVS00160-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 15.5 - 17.5 | Minimum, d<sub>3</sub> d1 + 9 | Fitted width, B<sub>1</sub> 6.7 ±0.6 | ||||||
| Product No.TWVS00180-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 17.5 - 19 | Minimum, d<sub>3</sub> d1 + 9 | Fitted width, B<sub>1</sub> 6.7 ±0.6 | ||||||
| Product No.TWVS00200-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 19 - 21 | Minimum, d<sub>3</sub> d1 + 12 | Fitted width, B<sub>1</sub> 9.0 ±0.8 | ||||||
| Product No.TWVS00220-N6T50 | Material Type [NBR] | For shaft diameter, d<sub>1</sub> 21 - 24 | Minimum, d<sub>3</sub> d1 + 12 | Fitted width, B<sub>1</sub> 9.0 ±0.8 | ||||||