O-Rings
Trelleborg O-Rings are the most widely used seals because they are efficient and economical and can be used in a wide variety of static and dynamic applications. O-Rings can be used to seal practically all liquid and gaseous media and they are available in elastomeric and other materials including EPDM, FKM and NBR, among others.
Size Range:
10 mm to 250 mm
Temperature:
-40 °C to 200 °C
Pressure (max):
25 MPa
Material Information for the product(s) on this page
S7
Colour:
Red
Basic Material:
VMQ
Commercial Description:
A 70 durometer VMQ. VMQ has excellent heat resistance, cold flexibility, dielectric properties, and especially good resistance to weather, ozone, and UV rays. VMQ has an operating range between -50°C and 175°C, but can withstand up to 230°C for a short period of time.
N7
Colour:
Black
Basic Material:
NBR
Commercial Description:
A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications. Used also as an energizer in T46N, M12N, Z20N, and Z52N.
N9
Colour:
Black
Basic Material:
NBR
Commercial Description:
A 90 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C (for a short period of time up to +120 °C). NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.
E7
Colour:
Black
Basic Material:
EPDM
Commercial Description:
A 70 durometer EPDM. EPDM shows good heat, ozone, and ageing resistance. In addition it also exhibits high levels of elasticity, good low temperature behaviour, as well as good insulating properties. The operating temperatures of applications for EPDM range between -45°C and +130°C. EPDM can often be found in applications with brake fluids (based on glycol) and hot water.
V7
Colour:
Green
Basic Material:
FKM
Commercial Description:
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V
V8
Colour:
Green
Basic Material:
FKM
Commercial Description:
An 80 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures.
V9
Colour:
Green
Basic Material:
FKM
Commercial Description:
An 90 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures.
Product No. | Inside diameter d1 | Cross section d2 | Hardness Nominal | Material Type | Add to Enquiry | |||||
---|---|---|---|---|---|---|---|---|---|---|
Product No.OR1500300-E7502 | Inside diameter d<sub>1</sub> 3 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [EPDM] | ||||||
Product No.OR1500800-V80G1 | Inside diameter d<sub>1</sub> 8 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 80 | Material Type [FKM] | ||||||
Product No.OR1500400-E7502 | Inside diameter d<sub>1</sub> 4 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [EPDM] | ||||||
Product No.OR1500400-E7518 | Inside diameter d<sub>1</sub> 4 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [EPDM] | ||||||
Product No.OR1501100-V70GA | Inside diameter d<sub>1</sub> 11 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [FKM] | ||||||
Product No.OR1501100-V80G2 | Inside diameter d<sub>1</sub> 11 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 80 | Material Type [FKM] | ||||||
Product No.OR1500750-E7518 | Inside diameter d<sub>1</sub> 7.5 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [EPDM] | ||||||
Product No.OR1501200-E7518 | Inside diameter d<sub>1</sub> 12 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [EPDM] | ||||||
Product No.OR1500800-E7502 | Inside diameter d<sub>1</sub> 8 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [EPDM] | ||||||
Product No.OR1501200-N9002 | Inside diameter d<sub>1</sub> 12 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 90 | Material Type [NBR] | ||||||
Product No.OR1508000-N7036 | Inside diameter d<sub>1</sub> 80 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [NBR] | ||||||
Product No.OR1507300-N7036 | Inside diameter d<sub>1</sub> 73 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [NBR] | ||||||
Product No.OR1508100-N7036 | Inside diameter d<sub>1</sub> 81 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [NBR] | ||||||
Product No.OR1507600-N7036 | Inside diameter d<sub>1</sub> 76 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [NBR] | ||||||
Product No.OR1508200-N7003 | Inside diameter d<sub>1</sub> 82 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [NBR] | ||||||
Product No.OR1508200-N7036 | Inside diameter d<sub>1</sub> 82 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [NBR] | ||||||
Product No.OR1508300-N7036 | Inside diameter d<sub>1</sub> 83 | Cross section d<sub>2</sub> 1.5 | Hardness Nominal 70 | Material Type [NBR] | ||||||
Product No.OR2401330-J9503 | Inside diameter d<sub>1</sub> 13.3 | Cross section d<sub>2</sub> 2.4 | Hardness Nominal 75 | Material Type [FFKM] | ||||||
Product No.OR2401330-N7027 | Inside diameter d<sub>1</sub> 13.3 | Cross section d<sub>2</sub> 2.4 | Hardness Nominal 70 | Material Type [NBR] | ||||||
Product No.OR2406160-N7036 | Inside diameter d<sub>1</sub> 61.6 | Cross section d<sub>2</sub> 2.4 | Hardness Nominal 70 | Material Type [NBR] | ||||||
Product No.OR2401330-V70G1 | Inside diameter d<sub>1</sub> 13.3 | Cross section d<sub>2</sub> 2.4 | Hardness Nominal 70 | Material Type [FKM] | ||||||
Product No.OR2401330-V80G1 | Inside diameter d<sub>1</sub> 13.3 | Cross section d<sub>2</sub> 2.4 | Hardness Nominal 80 | Material Type [FKM] | ||||||
Product No.OR2401360-J9503 | Inside diameter d<sub>1</sub> 13.6 | Cross section d<sub>2</sub> 2.4 | Hardness Nominal 75 | Material Type [FFKM] | ||||||
Product No.OR2401360-N70 | Inside diameter d<sub>1</sub> 13.6 | Cross section d<sub>2</sub> 2.4 | Hardness Nominal 70 | Material Type [NBR] | ||||||
Product No.OR2401360-N7036 | Inside diameter d<sub>1</sub> 13.6 | Cross section d<sub>2</sub> 2.4 | Hardness Nominal 70 | Material Type [NBR] |