Scraper WSA - WSA000060-N9MMN
The Scraper WSA is designed to be used in open grooves. It comes inside a metal case and is considered an economical choice in terms of performance and cost.
Material Properties:
Maximum Operating Temperature 100 °C
Minimum Operating Temperature -25 °C
Hardness Nominal 90
Hardness Tolerance +/- 5
Hardness Unit Shore A
Color Black
Specific Gravity 1.33 g/cm³
Gravity Tolerance +/-0.03 g/cm³
Material Type NBR/metal
Modulus 100% 10.8 MPa
Tensile Strength 10 MPa
Elongation at break 100 %
Compression Set 30 %
Compression Set Test Conditions 24h/100°C
Installation Dimensions:
Rod Diameter, dN h9 6 mm
Groove Diameter, D3 H8 13 mm
Groove Width, L3 +0.2 3 mm
Material Information for the product(s) on this page
N9MMN
Colour:
Black
Basic Material:
NBR/metal
Hardness:
85 (Shore A)
Commercial Description:
A 90 durometer NBR bonded to a steel case. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C (for a short period of time up to +120 °C). NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.