Login / Register 0 Login / Register

TWVS00550-VDT50

V-Ring type S - TWVS00550-VDT50

Profile S is wide and tapered, which provides a very firm hold on the shaft. The rings are available for shaft diameters from 5 to 199 mm

Material Properties:

Maximum Operating Temperature 175  °C

Minimum Operating Temperature -30  °C

Hardness Nominal 65  

Hardness Tolerance +/- 5  

Hardness Unit Shore A  

Color Black  

Material Type FKM  

Installation Dimensions:

For shaft diameter, d1 53 - 58  mm

Inside diameter d 49  mm

Height of cross section c 5  mm

Dimensions A 9.5  mm

Free Width, B 13  mm

Maximum, d2 d1 + 2  mm

Minimum, d3 d1 + 15  mm

Fitted width, B1 11.0 ±1.0  mm

Seal Capabilities:

Min. Temperature -25  °C

Max. Temperature 150  °C

Speed max. 10  m/s

Pressure max. 0  MPa

V-Ring type S

Material Information for the product(s) on this page

VDT50

Material data sheet

Colour:

Black

Basic Material:

FKM

Hardness:

65 (Shore A)

Commercial Description:

FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and aging. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures.