Login / Register 0 Login / Register

TG4000320-T40N

Turcon® Roto Glyd Ring® - External Sealing - TG4000320-T40N

A double-acting O-Ring energized seal designed for rotating, oscillating and helically moving pistons, rods and shafts. It is installed in grooves to ISO 7425 and is available in a single-acting version for higher rotating speeds.

Quality & Norms:

Conform recommendation of ISO 3320 yes  

O-Ring:

O-Ring Size 26.7 x 1.78  mm

O-Ring TSS Part No. ORAR00023  

Material Properties:

Material Type PTFE/NBR  

Installation Dimensions:

Bore diameter, DN H9 32  mm

Groove Diameter, d1 h9 27.1  mm

Groove Width, L1 +0,2 2.2  mm

Seal Capabilities:

Min. Temperature -30  °C

Max. Temperature 100  °C

Speed max. 2  m/s

Pressure max. 20  MPa

Turcon® Roto Glyd Ring® - External Sealing

Material Information for the product(s) on this page

T40

Material data sheet

Colour:

Grey

Basic Material:

PTFE

Filler:

Virgin PTFE compounded with carbon fibre

Commercial Description:

Turcon® T40 is a carbon-filled PTFE material commonly used in applications where a low-lubricating hydraulic fluid is used. This material is often used in high-freqency and short stroke applications. Because of the surface texture of this material, it is best used for sealing liquids as opposed to gasses.

N7

Material data sheet

Colour:

Black

Basic Material:

NBR

Commercial Description:

A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications. Used also as an energizer in T46N, M12N, Z20N, and Z52N.