Turcon® Roto Glyd Ring® - Internal Sealing - TG3000140-T40V
A double-acting O-Ring energized seal designed for rotating, oscillating and helically moving pistons, rods and shafts. It is installed in grooves to ISO 7425 and is available in a single-acting version for higher rotating speeds.
Quality & Norms:
Conform recommendation of ISO 3320 yes
O-Ring:
O-Ring Size 15.6 x 1.78 mm
O-Ring TSS Part No. ORAR00016
Material Properties:
Material Type PTFE/FKM
Installation Dimensions:
Rod Diameter, dN f8/h9 14 mm
Groove Diameter, D1 H9 18.9 mm
Groove Width, L1 +0,2 2.2 mm
Seal Capabilities:
Min. Temperature -10 °C
Max. Temperature 200 °C
Speed max. 2 m/s
Pressure max. 20 MPa
Material Information for the product(s) on this page
T40
Colour:
Grey
Basic Material:
PTFE
Filler:
Virgin PTFE compounded with carbon fibre
Commercial Description:
Turcon® T40 is a carbon-filled PTFE material commonly used in applications where a low-lubricating hydraulic fluid is used. This material is often used in high-freqency and short stroke applications. Because of the surface texture of this material, it is best used for sealing liquids as opposed to gasses.
V7
Colour:
Green
Basic Material:
FKM
Commercial Description:
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V