Login / Register 0 Login / Register

RL11N0600-Z20

Zurcon® - L-Cup - RL11N0600-Z20

Zurcon® L-Cup® is a single acting polyurethane rod seal with a unique design offering a hydrodynamic backpumping ability over the complete working pressure range.

Product info:

Preferred TSS material combination yes  

Material Properties:

Maximum Operating Temperature 110  °C

Minimum Operating Temperature -35  °C

Hardness Nominal 93  

Hardness Tolerance +/- 3  

Hardness Unit Shore A  

Color Turquoise  

Specific Gravity 1.2  g/cm³

Gravity Tolerance +/-0.02  g/cm³

Material Type PUR  

Modulus 100% 13.2  MPa

Tensile Strength 45  MPa

Elongation at break 450  %

Compression Set 24  %

Compression Set Test Conditions 72h/70°C  

TR 10 Point -37  °C

Installation Dimensions:

Rod dia., dN f8 60  mm

Groove dia., D H10 68  mm

Groove width, L +0,25 9  mm

Radius, r max. 0.3  mm

Ring width T 8.1  mm

Seal Capabilities:

Min. Temperature -35  °C

Max. Temperature 110  °C

Speed max. 0.5  m/s

Pressure max. 40  MPa

Zurcon® - L-Cup

Material Information for the product(s) on this page

Z20

Material data sheet

Colour:

Turquoise

Basic Material:

PUR

Hardness:

93 (Shore A)

Commercial Description:

Zurcon® Z20, 93ShA proprietary Thermoplastic Polyurethane material based on aromatic diisocyanate and polyester diol. Developed by Trelleborg Sealing Solutions for hydraulic application sealing elements, Zurcon® Z20 offers high wear and extrusion resistance, low compression set, a wide operating temperature range, minimal swelling in mineral oil and acceptable hydrolysis resistance.