Login / Register 0 Login / Register

QRAR04016-N7004

Quad-Ring® - QRAR04016-N7004

Quad-Rings® have an X-shaped cross section and are often used instead of a standard O-Ring. They can provide higher sealing efficiency and lower friction.

Seal dimensions:

Inside diameter, d1 15.6  mm

Inside diameter tolerance ± 0.23  mm

Cord diameter, W 1.78  mm

Cord diameter tolerance ± 0.08  mm

Material Properties:

Maximum Operating Temperature 100  °C

Minimum Operating Temperature -30  °C

Hardness Nominal 70  

Hardness Tolerance +/- 5  

Hardness Unit Shore A  

Color Black  

Material Type NBR  

Tensile Strength 14  MPa

Elongation at break 200  %

Institute Approvals:

FDA 1 yes  

Installation Dimensions:

Groove depth dynamic, t1 (+0.05) 1.5  mm

Groove depth static, t/h (+0.05) 1.4  mm

Groove width, b1, b4 (+0.2) 2  mm

Groove width, b2 (+0.2) b<sub>1</sub> + back-up ring thickness  

Groove width, b3 (+0.2) b<sub>1</sub> + back-up rings thickness  

Radial gap, Smax. 0.05  mm

Radius, r1 0.22  mm

Quad-Ring®

Material Information for the product(s) on this page

N7004

Material data sheet

Colour:

Black

Basic Material:

NBR

Hardness:

70 (Shore A)

Commercial Description:

A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.