Quad-Ring® - QRAR04003-N7004
Quad-Rings® have an X-shaped cross section and are often used instead of a standard O-Ring. They can provide higher sealing efficiency and lower friction.
Seal dimensions:
Inside diameter, d1 1.42 mm
Inside diameter tolerance ± 0.1 mm
Cord diameter, W 1.52 mm
Cord diameter tolerance ± 0.08 mm
Material Properties:
Maximum Operating Temperature 100 °C
Minimum Operating Temperature -30 °C
Hardness Nominal 70
Hardness Tolerance +/- 5
Hardness Unit Shore A
Color Black
Material Type NBR
Tensile Strength 14 MPa
Elongation at break 200 %
Institute Approvals:
FDA 1 yes
Installation Dimensions:
Groove depth dynamic, t1 (+0.05) 1.25 mm
Groove depth static, t/h (+0.05) 1.15 mm
Groove width, b1, b4 (+0.2) 1.7 mm
Groove width, b2 (+0.2) b<sub>1</sub> + back-up ring thickness
Groove width, b3 (+0.2) b<sub>1</sub> + back-up rings thickness
Radial gap, Smax. 0.04 mm
Radius, r1 0.22 mm
Material Information for the product(s) on this page
N7004
Colour:
Black
Basic Material:
NBR
Hardness:
70 (Shore A)
Commercial Description:
A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.