Turcon® AQ-Seal® 5 - PQ0303200-M12N
Double-acting, rubber-energized plastic faced seal with a rubber sealing insert. Includes two O-Rings and a Quad-Ring®.
Quality & Norms:
Correspond to recommendation of ISO 3320 yes
O-Ring:
O-Ring TSS Part No. ORAR00380
O-Ring Dimensions 291.47 x 5.33 mm
Material Properties:
Material Type PTFE/NBR
Installation Dimensions:
Bore Diameter, DN H9 320 mm
Groove Diameter, d1 h9 302 mm
Groove Width, L1 +0.2 12.3 mm
Seal Capabilities:
Min. Temperature -30 °C
Max. Temperature 100 °C
Speed max. 3 m/s
Pressure max. 50 MPa
QUAD-RING<sup>®</sup>:
QUAD-RING® TSS Part No. QRAR04278
QUAD-RING® Dimensions 304.39 x 3.53 mm
Material Information for the product(s) on this page
N7004
Colour:
Black
Basic Material:
NBR
Hardness:
70 (Shore A)
Commercial Description:
A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.
M12
Colour:
Dark Grey
Basic Material:
PTFE
Filler:
Virgin PTFE compounded with Turcon®, mineral fibre and additives
Commercial Description:
Turcon® M12 is a modern compound and the new standard industrial material. A development of thorough benchmarking and performance testing, Turcon® M12 offers low friction, high wear resistance and costs on par with standard bronze-filled compounds. This material is designed to be the first choice for seals used with linear motion, replacing standard (medium-filled) industrial bronze-filled compounds. Used in article numbers ending in M12N and M12V.
N7
Colour:
Black
Basic Material:
NBR
Commercial Description:
A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications. Used also as an energizer in T46N, M12N, Z20N, and Z52N.