Turcon® AQ-Seal® 5 - PQ0100630-M12V
Double-acting, rubber-energized plastic faced seal with a rubber sealing insert. Includes two O-Rings and a Quad-Ring®.
Quality & Norms:
Correspond to recommendation of ISO 3320 yes
O-Ring:
O-Ring TSS Part No. ORAR00137
O-Ring Dimensions 52.07 x 2.62 mm
Material Properties:
Material Type PTFE/FKM
Installation Dimensions:
Bore Diameter, DN H9 63 mm
Groove Diameter, d1 h9 53 mm
Groove Width, L1 +0.2 6.3 mm
Seal Capabilities:
Min. Temperature -10 °C
Max. Temperature 200 °C
Speed max. 3 m/s
Pressure max. 50 MPa
QUAD-RING<sup>®</sup>:
QUAD-RING® TSS Part No. QRAR04035
QUAD-RING® Dimensions 56.87 x 1.78 mm
Material Information for the product(s) on this page
V7002
Colour:
Black
Basic Material:
FKM
Hardness:
70 (Shore A)
Commercial Description:
FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and aging. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures.
M12
Colour:
Dark Grey
Basic Material:
PTFE
Filler:
Virgin PTFE compounded with Turcon®, mineral fibre and additives
Commercial Description:
Turcon® M12 is a modern compound and the new standard industrial material. A development of thorough benchmarking and performance testing, Turcon® M12 offers low friction, high wear resistance and costs on par with standard bronze-filled compounds. This material is designed to be the first choice for seals used with linear motion, replacing standard (medium-filled) industrial bronze-filled compounds. Used in article numbers ending in M12N and M12V.
V7
Colour:
Green
Basic Material:
FKM
Commercial Description:
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V