Login / Register 0 Login / Register

PDD000080-M12V

Turcon® Double Delta® - PDD000080-M12V

Turcon® Double Delta® is a rubber energised plastic faced seal. The seal is designed to expand and improve the service parameters of O-Rings and is installed in existing O-Ring grooves.

Quality & Norms:

Correspond to recommendation of ISO 3320 yes  

O-Ring:

O-Ring Dimensions 4.47 x 1.78  mm

O-Ring TSS Part No. ORAR00008  

Material Properties:

Material Type PTFE/FKM  

Installation Dimensions:

Bore Diameter, DN H9 8  mm

Groove Diameter, d1 h9 5.1  mm

Groove Width, L1 +0.2 2.4  mm

Seal Capabilities:

Min. Temperature -10  °C

Max. Temperature 200  °C

Speed max. 15  m/s

Pressure max. 35  MPa

Turcon® Double Delta®

Material Information for the product(s) on this page

M12

Material data sheet

Colour:

Dark Grey

Basic Material:

PTFE

Filler:

Virgin PTFE compounded with Turcon®, mineral fibre and additives

Commercial Description:

Turcon® M12 is a modern compound and the new standard industrial material. A development of thorough benchmarking and performance testing, Turcon® M12 offers low friction, high wear resistance and costs on par with standard bronze-filled compounds. This material is designed to be the first choice for seals used with linear motion, replacing standard (medium-filled) industrial bronze-filled compounds. Used in article numbers ending in M12N and M12V.

V7

Material data sheet

Colour:

Green

Basic Material:

FKM

Commercial Description:

A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V