O-Rings - OR1500300-E7502
O-Rings offer an efficient and economical sealing element for a wide range of static or dynamic applications and can be used to seal practically all liquid and gaseous media.
Seal dimensions:
Inside diameter d1 3 mm
Inside diameter tolerance ± 0.14 mm
Inside diameter d1 inch 0.118 in
Cross section d2 1.5 mm
Cross section tolerance ± 0.08 mm
Cross section d2 inch 0.059 in
Material Properties:
Maximum Operating Temperature 150 °C
Minimum Operating Temperature -45 °C
Hardness Nominal 70
Hardness Tolerance +/- 5
Hardness Unit Shore A
Color Black
Material Type EPDM
Tensile Strength 10 MPa
Elongation at break 125 %
Institute Approvals:
3A Sanitary yes
BAM yes
FDA 1 yes
KTW yes
USP 26 Chapter 87 yes
USP 26 Chapter 88 yes
WRAS yes
REG EC 1935/2004 yes
Animal Free (ADI) yes
Material Information for the product(s) on this page
E7
Colour:
Black
Basic Material:
EPDM
Commercial Description:
A 70 durometer EPDM. EPDM shows good heat, ozone, and ageing resistance. In addition it also exhibits high levels of elasticity, good low temperature behaviour, as well as good insulating properties. The operating temperatures of applications for EPDM range between -45°C and +130°C. EPDM can often be found in applications with brake fluids (based on glycol) and hot water.