Login / Register 0 Login / Register

Type TRU

Type TRU

Trelleborg Sealing Solutions Type TRU is a seal with completely rubber covered outer diameter. This type of seal is designed with an extended metallic support of the diaphragm that allows pressures up to 0.5 MPa. In order to avoid a "pop-out" of the seal, we suggest to fit an axial retainer (e.g. circlip, shoulder, etc.). The additional dust lip protects the main sealing lip against dust and other fine solid contaminants and therefore this type is recommended for use in polluted environments. To achieve a long lifetime a suitable lubricant between the two sealing lips should be applied.

Size Range:

8 mm to 120 mm

Temperature:

-40 °C to 200 °C

Pressure (max):

0,5 MPa

Speed (max):

10 m/s

Material Information for the product(s) on this page

4V012

Colour:

Brown

Basic Material:

FKM/metal

Commercial Description:

This is an FKM elastomer bonded to a metal case. FKM is often used in high-temperature applications, but usually there is a trade-off in performance at very low temperatures.

4N011

Colour:

Black

Basic Material:

NBR/metal

Commercial Description:

A standard choice for radial oil seals, this is an NBR elastomer bonded to a carbon steel case. This combination is a good balance of economical performance for applications with relatively mild temperatures.

Filter By

mm
mm
mm
Product No.Material TypeShaft diameter, d1 h11Bore diameter, d2 H8Width, bAdd to Enquiry
Product No.TRU000140-N7W01Material Type [NBR] Shaft diameter, d1 h11 14 Bore diameter, d2 H8 30 Width, b 10 Click here for Enquiry
Product No.TRU000350-N8MM5Material Type [NBR/metal] Shaft diameter, d1 h11 35 Bore diameter, d2 H8 47 Width, b 7 Click here for Enquiry
Product No.TRU000420-VBBV5Material Type [FKM/metal] Shaft diameter, d1 h11 42 Bore diameter, d2 H8 62 Width, b 7 Click here for Enquiry
Product No.TRU000450-N8MM5Material Type [NBR/metal] Shaft diameter, d1 h11 45 Bore diameter, d2 H8 62 Width, b 7 Click here for Enquiry
Product No.TRU000550-N8MM5Material Type [NBR/metal] Shaft diameter, d1 h11 55 Bore diameter, d2 H8 72 Width, b 7 Click here for Enquiry
Product No.TRU000680-N8MM5Material Type [NBR/metal] Shaft diameter, d1 h11 68 Bore diameter, d2 H8 90 Width, b 10 Click here for Enquiry
Product No.TRU000800-N8MV5Material Type [NBR/metal] Shaft diameter, d1 h11 80 Bore diameter, d2 H8 100 Width, b 7 Click here for Enquiry
Product No.TRU000850-N8MM5Material Type [NBR/metal] Shaft diameter, d1 h11 85 Bore diameter, d2 H8 105 Width, b 12 Click here for Enquiry
Product No.TRU001350-N8MMRMaterial Type [NBR/metal] Shaft diameter, d1 h11 135 Bore diameter, d2 H8 165 Width, b 15 Click here for Enquiry
Product No.TRU100300-N8MM5Material Type [NBR/metal] Shaft diameter, d1 h11 30 Bore diameter, d2 H8 47 Width, b 8 Click here for Enquiry
Product No.TRU100350-N8MM5Material Type [NBR/metal] Shaft diameter, d1 h11 35 Bore diameter, d2 H8 52 Width, b 6 Click here for Enquiry
Product No.TRU100400-N8MM5Material Type [NBR/metal] Shaft diameter, d1 h11 40 Bore diameter, d2 H8 52 Width, b 7 Click here for Enquiry
Product No.TRU100450-N8MM5Material Type [NBR/metal] Shaft diameter, d1 h11 45 Bore diameter, d2 H8 65 Width, b 8 Click here for Enquiry
Product No.TRU200200-N7MM2Material Type [NBR/metal] Shaft diameter, d1 h11 20 Bore diameter, d2 H8 30 Width, b 7 Click here for Enquiry
Product No.TRU200200-VBBV5Material Type [FKM/metal] Shaft diameter, d1 h11 20 Bore diameter, d2 H8 30 Width, b 7 Click here for Enquiry
Product No.TRU200450-VC2V5Material Type [FKM/metal] Shaft diameter, d1 h11 45 Bore diameter, d2 H8 65 Width, b 7 Click here for Enquiry
Product No.TRU500350-N7MMZMaterial Type [NBR/metal] Shaft diameter, d1 h11 35 Bore diameter, d2 H8 47 Width, b 6 Click here for Enquiry
Product No.TRUA00300-V8BV5Material Type [FKM/metal] Shaft diameter, d1 h11 30 Bore diameter, d2 H8 40 Width, b 7 Click here for Enquiry
Product No.TRUA00900-N8MM5Material Type [NBR/metal] Shaft diameter, d1 h11 90 Bore diameter, d2 H8 110 Width, b 12 Click here for Enquiry
Product No.TRUA00900-VBBV5Material Type [FKM/metal] Shaft diameter, d1 h11 90 Bore diameter, d2 H8 110 Width, b 12 Click here for Enquiry
Product No.TRUB00160-N7W01Material Type [NBR] Shaft diameter, d1 h11 16 Bore diameter, d2 H8 30 Width, b 7 Click here for Enquiry
Product No.TRUB00400-N8MM5Material Type [NBR/metal] Shaft diameter, d1 h11 40 Bore diameter, d2 H8 55 Width, b 7 Click here for Enquiry
Product No.TRUB00400-VC2V5Material Type [FKM/metal] Shaft diameter, d1 h11 40 Bore diameter, d2 H8 55 Width, b 7 Click here for Enquiry